wood: Commercial Uses

Commercial Uses

Freshly cut wood contains much moisture and tends to warp and split as it dries. Lumber is therefore seasoned before use—dried either slowly in the sun and air or more quickly by artificial means (kiln drying). Seasoning increases wood's buoyancy, strength, elasticity, and durability. Although synthetic materials have supplanted wood in many of its former uses, it is still widely employed for furniture, floors, railway ties, paper manufacture, and innumerable other purposes. Wood distillation yields methyl alcohol, wood tar, acetic acid, acetone, and turpentine; charcoal is made by burning or heating wood in insufficient air to consume it.

The wood of different species of trees varies considerably in weight, strength, and appearance. Softwood is normally uniform in grain (texture) and color; hardwood, in which the rays are more prominent and the arrangement of tissues is variable, produces lumber in which the grain may run vertically or horizontally and be coarse or smooth. The manner in which a log is cut results in lumber with thin or wide ray markings. A log cut horizontally shows the concentric annual rings; lengthwise cuts through the center are marked by thin vertical ray lines; and lengthwise cuts through the outer sections show the wood's characteristic wavy grain and wider ray markings, prized for their beauty. The rarer decorative woods may be cut in thin layers and glued to other wood structures (see veneer). Plywood, made of thin layers of wood glued so that the grains alternate in direction, makes an especially strong construction material. For some applications composition board offers another inexpensive substitute. The more recently developed cross-laminated timber is used to prefabricate entire walls or large sections of ceiling and floor. Pressure-treated wood is lumber that has had a preservative forced into it under pressure.

Sections in this article:

Introduction
Commercial Uses
Bibliography

See more Encyclopedia articles on: Botany: General